General Information; Order Number; Scope Of Supply; Accessories - W.E.ST. POS-124-U-PFN Technical Documentation Manual

1 General Information

1.1

Order number

1
POS-124-U -PFN-2030
Alternative products
POS-124-U-PDP
POS-124-U-ETC
1.2

Scope of supply

The scope of supply includes the module including the terminal blocks which are a part of the housing.
The Profibus plug, interface cables and further parts which may be required should be ordered separately.
This documentation can be downloaded as a PDF file from www.w-e-st.de.
1.3

Accessories

WPC-300
1
Compared with older versions (ordering code A for voltages output and I for current output) the code U (universal) is
used for programmable outputs.
2
The number of the version consists of the hardware version (first two digits) and the software version (last two digits).
Because of the development of the products, these numbers can vary. They are not strictly necessary for the order. We
will always deliver the newest version.
Page 4 of 62
2
Two axes positioning controller with programmable output (±10 V differential
voltage or 4... 20 mA), analogue or SSI sensor interface, ProfiNet IO inter-
face and optional synchronous control.
Version of the controller with ProfibusDP interface.
Version of the controller with EtherCat interface.
Start-Up-Tool (download: www.w-e-st.de/produkte/software)
POS-124-U-PFN-2030 23.08.2016