Table of Contents
Advertisement
3.4.1
Firmware Update
1. Go to
www.tdsi.co.uk
.zip firmware installation file.
2. Unzip the file and double click on the eX2MF206.exe for EXpert and EXcel
eX4MF106.exe for EXcel
C:\Program Files\X Installer)
3. Go into C:\Program Files\X Installer and be sure that the eX2MF206.abs is in there. If it
is not copy it from the unzip file and paste it into the default installation folder
(C:\Program Files\X Installer).
4. Double click on the XINSTALL.INI
Go to the [XINSTALL] and modify the name of the .abs
Code_File_Name= eX2MF206.abs (For EXpert and EXcel
Code_File_Name= eX4MF106.abs (For EXcel 4)
Go to the COMMS PORT SETTINGS change the port number and the Comm_Rate
to the one you are using
Comm_Port=The one you are using
Comm_Rate=The one you are using
If you are using IP (See also the note at the end of the document)
Go to the COMMS PORT SETTINGS change the port number to 0
Comm_Port=0
Go to the IP SETTINGS set the IP address and the IP port to 10001
IP_address=X.X.X.X
IP_Port=10001
SAVE THE FILE and close it.
5. Go to Start\Programs or (All Programs)\X Installer and run the application.
6. That is going to do the process automatically for you.
NOTE. If you are using IP it is recommended to be connected from your computer to the
ACU with a crossover cable. Although the procedure can be done over a network,
extreme caution on downloading the file to the correct ACU and guaranteeing a
continuous seamless network connection is necessary
to download the installer file or call customer support for the
This is going to install the X Installer (Default installation:
4
EXcel4 Controller
or on the
2
)
2
Page 35
Advertisement
Table of Contents
