Readers - TDSi EXcel4 User Manual

2.3.3

Readers

The screen braid of the cables must be terminated to the earthing clamps on the side of
the chassis plate unless the reader is connected to ground.
unscreened cable should be kept as short as possible and not be allowed to protrude
into the area of the electronics.
The following section covers the most popular readers currently supplied by TDSi. For any
other reader, please refer to the documentation that came with the reader.
EXprox Proximity readers (5002-0354 and 5002-0355)
Digital IR reader (5002-1781)
(The analogue IR reader 5002-0035 cannot be used with the EXcel
EXprox2 and EXprox2K Proximity readers (5002-0395 and 5002-0396)
Mifare EXsmart readers (5002-0440 and 5002-0441, mullion styles)
Mifare EXsmart2 readers (5002-0435, 5002-0433, 5002-0436, 5002-0434)
EXcel
4
Reader connection
terminal pins
14 Reader 1 MAG-DATA
15 Reader 1 MAG-CLK
16
18
17 Reader 1 +12V
28 Reader 2 +12V
25 Reader 2 MAG-DATA
26 Reader 2 MAG-CLK
27
29
28 Reader 3 +12V
30 Reader 3 MAG-DATA
31 Reader 3 MAG-CLK
32
29
44 Reader 4 +12V
41 Reader 4 MAG-DATA
42 Reader 4 MAG-CLK
43
45
readers (5002-0354 and
Mifare EXsmart (5002-
0440 and 5002-0441)
Digital IR reader (5002-
Reader 1 LED
Reader 1 0V
Reader 2 LED
Reader 2 0V
Reader 3 LED
Reader 3 0V
Reader 4 LED
Reader 4 0V
EXcel4 Controller
Colour
EXprox Proximity
5002-0355)
1781)
Yellow
White
Blue
Black
Red
Red
Yellow
White
Blue
Black
Red
Yellow
White
Blue
Black
Red
Yellow
White
Blue
Black
Any portion of the
)
4
Terminal Pin connection
EXprox2 and EXprox 2K
proximity reader (5002-0395
and 5002-0396)
EXsmart2 Mifare and
EXsmart2K Mifare(5002-
0435,5002-0433,5002-0436,
5002-0434)
These readers have
additional switch connections
put SW1 and SW2 to OFF
3 (Mag Data)
4 (Mag Clock)
7 (Red LED)
2 (0V)
1 (9 to 16V DC 75mA Max)
1 (9 to 16V DC 75mA Max)
3 (Mag Data)
4 (Mag Clock)
7 (Red LED)
2 (0V)
1 (9 to 16V DC 75mA Max)
3 (Mag Data)
4 (Mag Clock)
7 (Red LED)
2 (0V)
1 (9 to 16V DC 75mA Max)
3 (Mag Data)
4 (Mag Clock)
7 (Red LED)
2 (0V)
Page 11