Midtronics DSS-5000 Instruction Manual page 8

Chapter 1: Introduction
4. The Date/Time Settings are displayed. Tap Next to con-
tinue after making any adjustments.
12-hour or 24-hour format
Select Time
Format:
Select Date DD/MM/YYYY, MM/DD/YYYY, or
Format: YYYY/MM/DD
Select Time Time zone offset from Greenwich Mean Time
Zone:
Set Date: Set the current date
Set Time: Set the current time in the selected time zone
The Test Settings are displayed. Tap Next to continue after
5.
making any adjustments.
Battery Rating
Temperature Units
Decimal Separator
6. A list of detected Configured WiFi networks is displayed.
To select a network: For initial setup, no networks will be
displayed here yet.
To add a network: Tap the plus (+) sign, then select from
one of the displayed detected networks.
To manually add a network, tap the plus (+) sign again.
Follow the on-screen instructions to select the Network
SSID, Security, and IP Settings. Tap Next when finished.
Use the onscreen keypad to manually enter the Network
SSID, security type, and IP settings. If necessary, enter the
WiFi network password. Tap Next when finished.
A confirmation screen is displayed when the analyzer has
successfully connected to the WiFi network.
To delete a network: Tap a displayed network to select it.
Tap trash can icon ( 3 ) to delete it.
Midtronics Inc. 7000 Monroe Street
Default: CCA (Cold Cranking Amps)
Select Fahrenheit or Celsius
Select decimal point or comma
Willowbrook, IL 60527
7. Select the country in which the tool will be used (U.S. or
Canada).
The BMIS (Battery Management Information System) Ac-
8.
count screen is displayed. If the username and password are
not displayed, enter the correct username and password.
Country
Toyota U.S. toyota@dss5000.com
Toyota
toyotacanada@dss5000.com Toyota1!
Canada
Toyota U.S. lexus@dss5000.com
Toyota
lexuscanada@dss5000.com
Canada
IMPORTANT: If no WiFi connnection has been
made, follow the procedure described in the
WiFi section of Chapter 6: Settings.
9. Press  to download the list of BMIS locations.
10. Enter the Dealer ID or dealership name to search for the
correct dealership and tap on the displayed location.
11. Tap on the displayed location to connect the analyzer to an
existing BMIS account.
12. The email Address Book screen is displayed.
To add an email address: Tap the plus (+) sign, then use
the displayed keyboard to add the address.
To edit an email address: Tap the pencil
the displayed keyboard to edit the address.
To delete an email address: Tap a displayed email address
to select it. Tap trash can icon (
To use the Default Email Server Settings: Tap the gear
icon to use the default.
8
DSS-5000 Toyota Lexus
Username Password
Toyota1!
LexusMdx1!
LexusMdx1!
icon, then use
3
) to delete it.
www.midtronics.com