Gl3000P-E Specifications; Laser Emission Information; Gl3000P-E Series Warranty - LaserLine GL3000P-E Owner's Manual

Paint striping alignment laser
Table of Contents

Advertisement

Laser
Power
1 2 or 24 Volt DC Positive or negative Ground
Power Draw
recommended Ambient
Operating Temperature +36ºF to +1 20ºF / +2.2ºC to +48.8ºC
storage Temperature
Laser Source
Wavelength
Full Aperture output Power
7mm Aperture Power at 20cm Distance
Full Aperture Beam Diameter
Beam Diameter 1/E2
This product is guaranteed against defects in materials and workmanship with parts and labor, under
normal working conditions from one year from the date of purchase, except as noted herein.
LaserLine Mfg., Inc. liability under this warranty is limited to repairing or replacing any product returned
to an authorized service center for that purpose. any evidence of attempts to repair this unit by other
warning! Under no circumstances, attempt to open or disassemble Laser housing.
FAcTory SErvIcE cEnTEr
LaserLine MFG., InC.
1810 s.E. First street, suite H,
Redmond, OR 97756, USA
Phone: 1-541-548-0882
Fax: 1-541-548-0892
Email: Laserline@laserline.net
FAcTory SErvIcE: new Product Warranty service policy for new products stated above.
SErvIcE wArrAnTy: 1 year on replacement Parts, 90 days on Labor.
For ALL wArrAnTy: Call order Processing for rMa # at 1-541-548-0882. The unit will be re-
paired and returned by prepaid freight.
non-wArrAnTy
send to: LaserLine MFG., InC. at above address.

GL3000P-E SPEcIFIcATIonS

532nm Class 3B
4.00 amps (Maximum Operating)
0.03 amps (sleep Mode)
-40ºF to +150ºF / -40ºC to +65ºC

LASEr EMISSIon InForMATIon

<40mW (35mW Typical)
GL3000P-E wArrAnTy
than factory authorized personnel automatically voids the warranty.
Laser housing and Mount
Height
Length
Width Housing 1 5.6 cm (6-1/8 Inches) / Base 24. 1 cm (9-1/2 Inches)
Housing 15.8cm (6"-1/4 Inches)/ Base 25.4cm (10" Inches)
cable Length From Laser housing to control Box 6. 1 m (20 Ft)
1 2 or 24 volt Power cable Length from control Box 4.6m (15 Ft)
Shipping Weight
nd: YaG
Divergence
532nm
Beam Mode (Profile)
Emission
<5mW
Laser class EU
<25mm
14mm
Laser class USA
7
7
15.6 cm (6-1/8 Inches)
18.08cm (7"-1/8 Inches)
30.5 cm (1 2 Inches)
29.8cm (11"-3/4 Inches)
7.62m (25Ft)
4.57m (15Ft)
1 3.5kg (30 Lbs)
<0. 1 mrad
TEM00
CW or 2Hz
3B
IIIa

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gl3000p

Table of Contents