Streaks (3); Streaks (4) - Ricoh Pro 8300S Operating Instructions Manual

3. Troubleshooting Image Quality Problems

Streaks (3)

Streaks appear in solid-filled areas.
Cause:
If the toner contains small clumps, they disintegrate in the development unit, producing streaks.
This problem may occur if the machine is left unattended for a long period or the toner bottle is kept out
of its moisture-proof bag for a long period.
Solution:
1. Print 350 full-page, solid-fill A3 or DLT sheets.
2. Print the image. Is the problem resolved?
Yes Finished!
No Replace the toner bottle.
3. Print 350 full-page, solid-fill A3 or DLT sheets.
4. If the problem persists, contact your service representative.

Streaks (4)

Irregular black streaks appear, running parallel to the feed direction.
This occurs on both sides regardless of whether printing one-sided or duplex.
22
CEZ542