314 mm (12.4 in.)
R
R
R
R
Cause:
The image transfer current is transmitted to the drum, where a potential difference occurs between a
developed area and non-developed area and causes the intended image to be reproduced.
This may occur if:
• Solid filled images or bold characters are printed in black on a halftone background
• Printing is done at low temperature or humidity
• Many screening lines are used
Solution:
1.
In the [Main Unit: Image Quality] group on the [Adjustment Settings for Operators] menu,
select 0202: [Adjust Image Density] and execute [Adjust Image Density].
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Contact your service representative.
Scratched Images and Stained Paper Edges
Scratched images or soiled paper edges appear.
R
R
CZC308
Toner Spotting/Staining
29