Starting Operation; Switching On And Off - PRO BAUTEAM Easycutter Series Operating Manual

Technical data
Cut length
Cut depth
Weight
Power with thermoprotection
intenDet uSe
The machine is intended for the cutting of non-plasticized foam (for example Polystyrene or
Styrodur) for the thermal insulation of buildings. The non-plasticized foam slabs must be free
of adhesive, adhesive residues or any other kind of contamination.
aSSemBLy
before any work on the machine itself, pull the mains plug and read all the instructions. non-obser-
vance of the instructions below can cause electric shock, fire and or serious personal injuries.
The following assembly instruction describes all models and all optional equipment
available for your foamcutter. Please note that your foamcutter may not be equipped with
all of the described functions and accessories. A complete overview of accessories can be
found in our accessory program.
assembly, Pages: 2-3
Wire
Contrary to new spare wires, the originally installed wire in the Easycutter is not copper
coloured anymore but dark. This does not constitute a defect, but is a sign that the cutter
was checked in hot condition for its proper functioning before leaving the factory.

Starting OPeratiOn

before starting operation read all the instructions. non-observance of the instructions below
can cause electric shock, fire and or serious personal injuries.

Switching On and Off

1. For start up it is only necessary to plug in the XLR-connector (1) of the transformer into
the corresponding socket on the bow and connect the power plug to the power socket.
2. Press the On/Off switch (2) and keep it depressed. The cutting wire is fully functional
within seconds.
3. Pull bow in direction of the material – material will be cut.
4. fire risk! Release the On/Off switch after every cut has been implemented; the cutting
wire cools down within a few seconds.
Easycutter I
1.070 mm
320 mm
10 kg
40 V / 160 Watt / 230V – 50/60Hz /
IP 54
Easycutter II
1.350 mm
320 mm
10 kg
40 V / 200 Watt / 230V – 50/60Hz /
IP 68
14
10