Declaration Of Conformity - PRO BAUTEAM Easycutter Series Operating Manual

Warranty anD cLeaning
before maintenance, cleaning and storage, pull out the power plug and read all of the safety informa-
tion and instructions. failure to comply with the safety information and instructions may result in
electric shock, fi re and/or serious injury.
cleaning
In particular, ventilation openings and the tool holder must be cleaned using a cloth
and brush after every use. If compressed air is used, it must not exceed 3 bar. Do not
use solvents to wipe the plastic parts clean.
Disposal
The machine, accessories and packaging should be sorted for environmental-friendly
recycling. Do not dispose of power tools into household waste! Only for EC countries:
According to the European Guideline 2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national right, power tools that are no longer
usable must be collected separately and disposed of in an environmentally correct
manner.

Declaration of Conformity

We declare that the following product corresponds to the determinations of the directives
identifi ed below – including their changes applicable at the time of the declaration. Any
conversion or change of the machine on the part of unauthorised third parties, which is
not co-ordinated with us, means the immediate loss of the validity of this declaration.
Product: Polystyrene cutter (Foamcutter)
Relevant EU Directives
98/37/EG
Applied standards
EN 55014-1 (VDE 875 Teil 14-1): 2003-09; EN 55014-1:2000 + A1:2001 + A2:2002
EN 55014-2 (VDE 875 Teil 14-2): 2002-08; EN 55014-2:1997 + A1:2001
EN 61000-3-2 (VDE 838 Teil 2): 2001-12; EN 61000-3-2:2000
EN 61000-3-3 (VDE 838 Teil 3): 2002-05; EN 61000-3-3:1995 + Cor.:1997 + A1:2001
EN 60335-1 (VDE 07000-1):2007-02; EN 60335-1:2002+A11+A1+A12+Corr.:+A2:2006
EN 60335-2-45 (VDE 0700 Teil 45): 2003-06; EN 60335-2-45:2002
EN 50366 (VDE 0700-366):2006-11; EN 50366:2003+A1:2006
Applied harmonized standards
EN ISO 12100-1
__________________
Andre Rahe
CEO
Pro Bauteam Vertriebs- & Produktionsgesellschaft mbH
Grafenheider Strasse 111
33729 Bielefeld/ Germany
73/23/EWG
EN ISO 12100-2 2004/108/EC
2004/108/EC
2006/95/EC
2006/95/EC
Bielefeld, 23.08.2011
Fon: 0049 521 - 9774401
Fax: 0049 521 - 9774406
16