Gps Receiver; Activating The Gps Receiver 3 - Muller Elektronik BASIC-Terminal Installation And Operating Instructions Manual

7.10

GPS Receiver

7.10.1 Activating the GPS Receiver
Procedure
Copyright © Müller-Elektronik GmbH & Co.KG
⇨ The contents of the folder will be displayed.
The names of the folders are the ISO IDs of the applications whose temporary data they
store.
4. Select the desired file.
5. - Delete file.
⇨ Deleting file.
6. - Restart terminal.
When you connect a GPS Receiver to the terminal, you must activate and configure it.
In order to activate the GPS Receiver, you must first activate its driver.
A driver is a small program that controls connected farm equipment. The drivers for the farm
equipment supplied by Müller-Elektronik are pre-installed on the terminal.
1. Switch to the "Driver settings" screen:
| Service | Driver settings
⇨ The following screen will appear:
2. Select "GPS".
3. Click on "GPS".
Configuring the terminal in the Service application
7
GPS Receiver
31