Configuring The Basic Display Settings - Muller Elektronik BASIC-Terminal Installation And Operating Instructions Manual

Configuring the terminal in the Service application
7

Configuring the basic display settings

7.5 Configuring the basic display settings
Procedure
List of parameters
26
⇨ The following screen will appear:
2. Change the operating mode.
Depending on which operating mode is currently active, you can use one of the function icons:
– Activate day mode.
– Activate night mode.
⇨ The brightness of the display will be adjusted immediately.
The basic display settings can be adjusted on the "Display settings" screen.
1. Switch to the "Display settings" screen:
| Service | Display settings
⇨ The following screen will appear:
2. - Change the desired parameter.
Parameter
Brightness
Day
Night
Night mode
Meaning
Adjust the brightness for day mode
Adjust the brightness for night mode
Switch night mode on and off
Copyright © Müller-Elektronik GmbH & Co.KG