Pve Stands For Pve Actuator - Danfoss PVE Series 4 Technical Information

Technical Information
General Information
8
PVE, Series 4 for PVG 32/100/120 and PVHC
PVE controlled PVG with PVSK

PVE stands for PVE actuator

The Danofss PVE is built on more than thirty years experience of electrical valve control and is the perfect
fit for our high performance proportional valves PVG 32, PVG 100 and PVG 120, as it is for our EH steering.
All our products are developed in close cooperation with system manufacturers from the mobile
hydraulic market. That is the reason for our high performance in all market segments
The PVE can be controlled from a switch, a joystick, a PLC, a computer or a Danofss PLUS+1
controller. The PVE is available in multiple variants. A short list here just gives the main variations.
Available PVE variants
Actuation
Control signal
Precision
Feedback
Connectors
Fault detection and reaction
Power supply
520L0553 • Rev GD • Jan 2014
On/Off
Proportional - Closed loop controlled
Proportional - Direct control
Voltage
PWM
Current (PVHC)
Standard precision
High precision
Super high precision
Spool position
Direction indicator
Error
None
Deutsch
AMP
DIN/Hirschmann
Active
Passive
None
11 V – 32 V multi-voltage
12 V
24 V
®
micro-