Pvhc Control Specification - Danfoss PVE Series 4 Technical Information

Technical Information
Technical Data
PVE, Series 4 for PVG 32/100/120 and PVHC
Operating temperature (continued)
Ambient
Stock
Recommended long time storage in packaging
Filtering in the hydraulic system
Required operating cleanliness level
For further information see Danfoss documentation Hydraulic Fluids and Lubricants, Technical Information
520L0463.
Enclosure and connector versions
Version of connector Hirschmann connector
Grade of enclosure* IP 65
* According to the international standard IEC 529 NB: In particulary exposed applications, protection in
the form of screening is recommended.
PVP modules, Pilot pressure curves

PVHC control specification

PVHC control specification
Supply voltage U
DC
Controller output current
Pilot pressure
Resistance
Response time
PWM frequency
PVHC reaction time
From neutral position to max. spool travel at power on
520L0553 • Rev GD • Jan 2014
-30˚C [-22˚F]
-40˚C [-40˚F]
10˚C [50˚F]
18/16/13 (ISO 4406, 1999 version)
AMP JPT connector
IP 66
157-520.11
12 V
DC
0 – 1500 mA
20 – 25 bar [290-363 psi]
4.75 Ω ± 5%
150 – 200 ms
100 → 400 Hz
max.
rated
min.
60˚C [140˚F]
90˚C [194˚F]
30˚C [86˚F]
Deutsch connector
IP 67
24 V
DC
0 – 750 mA
20.8 Ω ± 5%
0.235s
0.180s
0.120s
35