C) Alarm Mode - Renkforce GX111 Operating Instructions Manual

c) Alarm Mode

There is the important alarm mode in parallel to and independent of the operating mode. This mode defines whether
the GX111 is „armed" as an alarm device and may send text message alarms when sensors are triggered and optio-
nally issue an alarm sound.
The conditions are as follows:
ENABLE ALARM #1513
The alarm mode is switched on.
DISABLE ALARM #1513
The alarm mode is switched off.
Alarm mode on:
This mode is entered via the command „ENABLE ALARM #<PIN>". Whether the alarm mode is active or not can only
be requested via the command „TEST STATUS #1513". If the alarm mode is on and recognises an alarm incident via
an activated alarm source (shock, position, ...), all phone numbers in the phone book of the GX111 (not the SIM card!)
will receive the corresponding alarm text message and an optional alarm sound can be issued.
Alarm mode off:
In this mode, GSM costs arise only when an action performed by you causes a reaction of the GX111. The GX111 only
sends answer text messages when a text message with the correct PIN has been received. The GX111 does not send
out any alarm text messages on its own.
The alarm mode is (deliberately) off by default.
Observe that high costs may arise from sending text messages (particularly abroad), depending on how the
GX111 is configured.
10