Table of Contents
Advertisement
10. Functional Descriptions
The following examples assume that the PIN is „1513".
The action „TEST" ALWAYS contains answering with the correct parameters for the function and thus is not
indicated. Several functions share one answer text message to use the maximum of a text message.
The action „RESET" is ALWAYS resetting of a function to the factory settings (all parameters). Deviations
are indicated separately below.
a) Determining „STATUS"
The command „STATUS" returns a summary of the most important settings and conditions of the GX111.
TEST STATUS #1513
Then the GX111 sends an answer text message.
Example (the right column shows only a description; it is not contained in the text message):
GX111 01.XX
GSM: 59%
GPS: on
TEMP: 28 C C urrently measured temperature
Accu: 75%
Slope: 0 degree
Diagnose: off
Alarm: Disabled
18
Name of the GX111, firmware version
GSM signal strength
GPS receiver is on
Current charge condition of the rechargeable battery
Measured position angle 0° or no reference angle set
Diagnosis mode off
Alarm treatment via text message deactivated
Advertisement
Table of Contents
