Installation; Alarm System Installation Site; Additional Advice Before Mounting - Renkforce 752168 Operating Instructions Manual

6. Installation

Ensure that the alarm control centre is non-charged and without
power supply during installation.

6.1 Alarm system installation site

When choosing the alarm system's installation site, observe precisely that
the alarm system can be reached before the end of the entry delay (within
30 seconds).
Depending on installation site, it may be a good idea to additionally secure
the installation site via a signalling device (e.g. motion detector).
When selecting an installation location for your system, make sure it is not
exposed to direct solar radiation, vibrations, heat, cold and moisture.

6.2 Additional advice before mounting

Before actually mounting the alarm control centre and its components you
should use a blueprint of the premises to be protected to create a plan and
then record this plan, e.g. as a sketch on paper, to record how your object
can be best and individually secured. Draw in the sensors of the doors, win-
dows, rooms etc to be secured.
Observe the characteristics of the individual sensors (e.g. detection ang-
le of a movement sensor). This sketch allows you to estimate the possible
materials requirements (e.g. length and lead number of cables, number of
movement sensors, door/window sensors etc).
33