Table of Contents
Advertisement
After sending the command „SET TEL1....", you will receive a text message answer with a list of saved phone num-
bers:
GX111 1.xx
TEL1: +49111...
TEL2: +49222...
TEL3: +49333...
TEL3: +49444...
Deleting the phone numbers saved
To delete phone number 1 and 3, for example, you need to send two text messages:
RESET TEL1 #1513
RESET TEL3 #1513
After sending the command „RESET TEL...", you will receive a text message answer.
Testing phone numbers
To check the phone numbers stored in the product, use the following command:
TEST TEL #1513
The text message commands (SET TEL1, SET TEL2, SET TEL3,...) with a specified phone number only change the
phone number of the corresponding memory. The numbers of the other phone book entries are retained.
21
Advertisement
Table of Contents
