Table of Contents
Advertisement
15. Reset to Default
The factory settings are reset with the buttons „RESET" and „S1".
Important!
The PIN of the GX111 is reset to the default value #1513 in the reset.
The PIN of the SIM card remains unchanged, however.
If you have set the SIM card's PIN to any other value than 1513, the GX111 will no longer work after the
reset, and you have to change the PIN of the GX111 accordingly!
To reset the GX111 to the factory settings via the buttons, proceed as follows (this must be done within 3 seconds):
• Keep the button „S1" pushed
• Briefly push the button „RESET".
• Release the button „S1" again.
If the button „S1" is pushed for more than 3 seconds in total, the GX111 will not be reset to the factory
settings, since it is assumed that you pushed the button by accident.
After successful resetting to factory settings, a flashing pattern is output via the „ERR" LED. The „ERR" LED flashes
3 times in quick sequence (0.25 seconds on, 0.25 seconds pause, etc.).
16. Maintenance and Cleaning
The product is maintenance-free for you. Servicing or repair must only be carried out by a specialist or specialist
workshop. There are no components on the inside of the product that need maintenance by you. This is why you
should never open/disassemble it (apart from the work described in these operating instructions for inserting/changing
the rechargeable battery).
A dry, soft and clean cloth is sufficient for cleaning the outside.
Dust can easily be removed with a long-hair, soft and clean brush and a vacuum cleaner.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since these may
damage the casing or even impair function.
44
Advertisement
Table of Contents
