Power; Lifting Forc Eof Three-Point Hitch; Tensile Force - Zetor Proxima Plus Series Operator's Manual

ESSENTIAL TECHNICAL PARAMETERS

POWER

Model of the tractor
Power on the output shaft (kW±2%)
- at nominal speed of the engine and engaged 1,000 min
the output shaft
Not run-in engine (up to 100 Mth)
Run-in engine (from 100 Mth)

LIFTING FORC EOF THREE-POINT HITCH

Lift capacity at the end of the lower drawbars of the rear thee-
point hitch during the entire lift while using up the maximum
pressure with 2 outer cylinders
- *cylinder 75mm in diameter (kN)
Lift capacity at the end of the lower drawbars of the front three-
point hitch during the entire lift while using up the maximum
pressure (kN)

TENSILE FORCE

Maximum tensile force (kN) in swinging draw bar on concrete,
tractor in emergency finish with ballast weights, with slippage
to 15%
Proxima
Plus 90
-1
of
50
52.5
35
234
Proxima Proxima
Plus 100 Plus 110
55 62.5
58 65.5
38
23
36,5 38