Key In Position "Ii; Lever Of Manual Refulation Of Fuel; Control Of Engine Stop - Zetor Proxima Plus Series Operator's Manual

Table of Contents

Advertisement

KEY IN POSITION "II"

The key is in this position when starting
the engine; voltage is connected to the
starter and all consumers except wipers,
washers, cabin fan and A/C equipment.
After start of the engine the key returns
automatically back to position "I".
GETTING TO KNOW THE TRACTOR
E143
LEVER OF MANUAL REFULATION OF
FUEL
A - Maximum speed of the engine
B - Idle run
The lever allows setting of speed of the
engine within range A to B.
55
E144

CONTROL OF ENGINE STOP

Pulling up the control knob causes im-
mediate stop of the engine and it slight
turning in pulled up position locks its po-
sition.
After the engine is stopped, turn back the
control knob to its original position.
The engine cannot be started if
the control knob remains pulled
up.
X145b

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proxima plus 90Proxima plus 100Proxima plus 110

Table of Contents