Installation - Ovation Explorer User Manual

Scan position memory, auto reposition after unexpected movement
Strobe effect with 18 flashes per second and pulse effect
General dimming and blackout for all four colors
Excellent color mixing and rainbow effect
Friendly blue LCD display
Preset program: 7 built in programs can be called up via DMX controller
Dimension

Installation

On the rear panel of the item you can find an 3pin XLR-jack (DMX Out) and an 3pin
XLR-plug (DMX In), which can be used for connecting several devices. Choose the device
which is to control the effects. Connect the DMX OUT-jack with the DMX IN-plug of the
next device.
DMX-512 connection / connection between fixtures
Occupation of the XLR-connection:
If you are using controllers with this occupation, you can connect the DMX-output of the
controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to
connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.
Building a serial DMX-chain:
Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the
next fixture. Always connect one output with the input of the next fixture until all fixtures
are connected.
2