Table of contents Caution! ��������������������������������������������������������������������������������������������������������������������������������������3 Introduction ��������������������������������������������������������������������������������������������������������������������������������3 Safety instructions ����������������������������������������������������������������������������������������������������������������������3 Overview �������������������������������������������������������������������������������������������������������������������������������������3 Installation ����������������������������������������������������������������������������������������������������������������������������������4 Read ‘Safety information’ before installing the fixture............... 4 Fastening the fixture to a flat surface ....................4 Mounting the fixture on a truss ......................5 Securing with a safety cable .......................5 DMX-512 connection/connection between fixtures................5 Power connection ..........................6 Operation ������������������������������������������������������������������������������������������������������������������������������������6...
- download the latest version of the user manual from the Internet Introduction Thank you for having chosen Mini Fresnel 50TZ. You will see you acquired a powerful and versatile device. Unpack your item. Before you initial start-up, please make sure that there is no damage caused by trans- portation.
Installation Read ‘Safety information’ before installing the fixture. The fixture is designed for indoor use only and must be used in a dry location with adequate ventilation. Ensure that none of the fixture’s ventilation slots are blocked. Fasten the fixture to a secure structure or surface. Do not stand it on a surface or leave it where it can be moved or fall over.
low with a securely anchored safety cable that will hold the fixture if the primary fastening method fails. Mounting the fixture on a truss The fixture can be clamped to a truss or similar rigging structure in any orientation. When installing the fixture hanging vertically down, you can use an open-type clamp such as a G-clamp.
Earth(Ground) Operation The Mini Fresnel 50TZ can operate in three different modes. In each mode you can run the fixture as a stand alone fixture or in a master/slave confiugration. This next section will detail the differences in the operating modes.
In the case of the Mini Fresnel 50TZ, which is 1/2/3/5 channels fixture. If you set, for example, the address in the 1 channel mode to channel 2, the device will use the channel 2 for control.
Control Menu Map MENU SUB MENU OPERATION Addr d001-d512 RDM/DMX address CHnL Channel mode Strb S.01-s.20 Strobe with spead increasing uL-- u.000-u.255 WW dimmer CL-- C.000-C.255 CW dimmer 000-255 Rotary control of dimmer nod.0 Dimmer speed 0 (no delay) nod.1 Dimmer speed 1 nodE nod.2...
2 Channels Mode Function Function Control Dimmer 000-255: 0-100% dimmer Strobe 000-255: Strobe with speed increasing 3 Channels Mode Function Function Control Dimmer 000-255: 0-100% dimmer Warm white 000-255: WW 0-100% dimmer Cold white 000-255: CW 0-100% dimmer 5 Channels Mode Function Function Control Dimmer...
• Measure the mains voltage on the main connector. Technical specifications Model Mini Fresnel 50TZ Power supply: AC100-240V, 50/60Hz Light source: 50W WW + 50W CW tunable LED Color temperature: 2,700K - 6,500K CRI 95, R9 ≥ 90 Color Rendition: Zoom range: 25°...