Table of Contents
Advertisement
Quick Links
USER MANUAL
EXPLORER
Caution!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
Keep this device away from rain and moisture!
Make sure it is grounded when using it!
Unplug mains lead before opening the housing!
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has
to
- be qualified
- follow the instructions of this manual
Introduction
Thank you for having chosen Explorer moving head wash light. You will see you acquired
a powerful and versatile device. Unpack your item. Before you initial start-up, please make
sure that there is no damage caused by transportation. Should there be any, consult your
dealer and do not use the device.
Safety instructions
This device has left our premises in absolutely perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this user manual. Always disconnect
from the mains, when the device is not in use or before cleaning it. Keep away children
and amateurs from the device! There are no serviceable parts inside the device.
Maintenance and service
operations are only to be carried out by authorized dealers.
Features
36 * 10W high power RGBW 4-in-1 LED
Extremely Long Life:50,000 Hr and low power consumption
DMX channel:7/13 channels
Zoom function
Beam angle:15-60°
Pan/tilt movement: 8 bit and 16 bit resolution
Three operation modes: DMX 512 protocol, stand alone, master/slave
For smooth and precise resolution
Pan: 540 optional, Tilt: 270 movement
High speed of pan/tilt movement, speed of pan/tilt movement is adjustable
1
Advertisement
Table of Contents
Related Manuals for Ovation Explorer
Summary of Contents for Ovation Explorer
-
Page 1: User Manual
- follow the instructions of this manual Introduction Thank you for having chosen Explorer moving head wash light. You will see you acquired a powerful and versatile device. Unpack your item. Before you initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device. -
Page 2: Installation
Scan position memory, auto reposition after unexpected movement Strobe effect with 18 flashes per second and pulse effect General dimming and blackout for all four colors Excellent color mixing and rainbow effect Friendly blue LCD display Preset program: 7 built in programs can be called up via DMX controller Dimension Installation On the rear panel of the item you can find an 3pin XLR-jack (DMX Out) and an 3pin... - Page 3 DMX-512 connection with DMX terminator For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 resistor connected between pins 2 and 3,which is then plugged into the output XLR socket of the last fixture in the chain.
- Page 4 Overview (1) Lens (9) Enter-button (2) Yoke (10) Control Board (3) Base (11) Housing (4) Carrying handle (12) 3-PIN DMX output socket (5) LCD-Display (13) 3-PIN DMX input socket (6) Mode/esc-button (14) Power switch (7) Up-button (15) Fuse (8) Down-button (16)Power supply...
-
Page 5: Control Menu Map
Control menu map... -
Page 7: Operation
Operation Projector DMX starting address selection All fixtures should be given a DMX starting address when using a DMX signal,so that the correct fixture responds to the correct control signals. This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller. - Page 8 If you set the same address, all the units will start to listen to the same control signal from the same channel number. In other words, changing the settings of one channel will affect all the fixtures simultaneously. If you set a different address, each unit will start to listen to the channel number you have set,based on the quantity of control channels of the unit.
- Page 9 Channel Function Green Blue White X-movement Y-movement Zoom Mode 2: Channel Functions General dimming Strobe Green Blue White X-movement...
-
Page 10: Technical Specifications
Y-movement CH10 X/Y-movement speed CH11 CH12 CH13 Zoom Set DMX address Display the DMX 512 value of each channel.With this function you can display the DMX 512 value of each channel. The display automatically shows the channel with a value changing.