Technical Specifications - Ovation Explorer User Manual

CH9
CH10
CH11
CH12
CH13
Set DMX address
Display the DMX 512 value of each channel.With this function you can display the DMX
512 value of each channel. The display automatically shows the channel with a value
changing.
Synchronization & master /slave mode
Take some items and connect them by DMX cables, disconnect the items from DMX
controller, the items will wok synchronously, one as master, the others as slave.
Auto Program
With this function, you can run the internal program. You can select the desired program
under.You can set the number of steps under .You can edit the individual scenes
under .With this function, you can run the individual scenes either automatically, i.e. with
the adjusted Step-Time.
Error message
When you turn on the fixture, it will make a reset first. The display may show XXer while
there are problems with one or more channels. XX stands for channel1, 2, 3,etc who has
the testing sensor for positioning.For example,when the display shows Red Er , it means
there is some error in channel 1,If there are some errors on channel 1, channel 2, channel
5 at the same time, you may see the error message Red Color Er , Green Er ,Pan Er flash
repeated for 5 times, and then the fixture will generate a reset signal, all the stepper reset.
If the fixture remain error message after performing reset more than 3 times, it will detect
whether the fixture has more than 3 errors. If the fixture has more than 3 errors (including
3 errors), all the channels can not work properly; but if the fixture has less than 3 errors,
only the channels which have errors can not work properly, others can work as usual.

Technical specifications

Power supply: 100V~240V AC,50Hz / 60Hz
Power consumption: max. 430W
Net weight: 9.8KGS
Gross weight: 11.5KGS
Packing dimensions: 37x33x46cm
Remark: All information is subject to change without prior notice.
Y-movement
X/Y-movement speed
CMY
CMY
Zoom
10