Ovation POWER PAR 350 TW User Manual

31*10w led par tunable led

Advertisement

Quick Links

POWER PAR 350 TW
31*10W LED PAR Tunable LED
USER MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Ovation POWER PAR 350 TW

  • Page 1 POWER PAR 350 TW 31*10W LED PAR Tunable LED USER MANUAL...
  • Page 2: Table Of Contents

    Table of contents Caution! ........................3 Introduction ......................3 Safety instructions ....................3 Overview.........................3 Installation ......................4 Read ‘Safety information’ before installing the fixture..............Fastening the fixture to a flat surface ....................Mounting the fixture on a truss ......................Securing with a safety cable ....................... DMX-512 connection/connection between fixtures ................
  • Page 3: Caution

    - download the latest version of the user manual from the Internet Introduction Thank you for having chosen Power Par 350 TW. You will see you acquired a powerful and versatile de- vice. Unpack your item. Before you initial start-up, please make sure that there is no damage caused by trans- portation.
  • Page 4: Installation

    Yoke Yoke fixation knob Barndoors’ fixation clips Barn door Dmx input Dmx output On/Off switch Digital display Menu button Up button Down button Enter button Fuse PowerCon in PowerCon out Installation Read ‘Safety information’ before installing the fixture. The fixture is designed for indoor use only and must be used in a dry location with adequate ventilation. Ensure that none of the fixture’s ventilation slots are blocked.
  • Page 5: Mounting The Fixture On A Truss

    The fixture can be fastened to a hard, fixed, flat surface that is oriented at any angle. Ensure that the sur- face and all fasteners used can support at least 10 times the weight of all fixtures and equipment to be installed on it.
  • Page 6: Power Connection

    Earth(Ground) Operation The Power Par 350 TW can operate in different modes. In each mode you can run the fixture as a stand alone fixture or in a master/slave confiugration. This next section will detail the differences in the operat- www.ovationlight.com...
  • Page 7: Addressing

    In the case of the Power Par 350 TW, which is 4 channels fixture. If you set, for example, the address in the 4 channel mode to channel 5, the device will use the channel 5 to channel 8 for control.
  • Page 8: Control Menu Map

    3. The fixture will now run sound mode. Control Menu Map MENU SUB MENU OPERATION A001 A001-512 DMX address CC-- O000-O255 CW&WW jump switching, speed increasing CP-- CP00-99 CW&WW fading, speed increasing DE-- DE00-99 Auto programs, speed increasing BEBE Sound mode O--- O000-255 CW dimmer...
  • Page 9: Technical Specifications

    • Measure the mains voltage on the main connector. Technical specifications Model Power Par 350 TW Power supply: AC100-240V, 50/60Hz Light source: 31 x 10W LED(16WW+15CW LED) Color temperature: 2700K~7000K tunable Power consumption: 240W Color Rendition: CRI ≥70 Beam Angle: 25°...
  • Page 10 www.ovationlight.com V1.0...
  • Page 11 www.ovationlight.com V1.0...
  • Page 12 www.ovationlight.com V1.0...

Table of Contents