Panasonic LUMIX DC-G95 Owner's Manual page 62

2. Getting Started/Basic Operations
• Fn button settings at the time of purchase.
Fn1 [Dial Operation Switch]
Fn2 [Q.MENU]
Fn3 [LVF/Monitor Switch]
Fn4 [Wi-Fi]
Fn5 [Preview]
Fn6 [Level Gauge]
• With [Video Record], you can start/stop recording a motion picture in the same way as with the
motion picture button.
• When set to [Focus Area Set], it is possible to display the position setting screen of either AF
area or MF Assist.
• When [1 Shot "4K PHOTO"] is set, recording is performed in a specified 4K Photo Mode only
once. After the recording has finished, the camera returns to normal state.
• When [Operation Lock] is set, a certain type of operation is disabled. Set the type of operation
to be disabled in [Operation Lock Setting] in the [Custom] ([Operation]) menu.
• If you assign [Rec / Playback Switch], you can switch between recording and playback
modes.
• If the screen displays A or similar, the displayed operation will
be performed instead of the function assigned to Fn buttons by
[Fn Button Set].
Fn7 [Histogram]
Fn8 [I.S. Lock (Video)]
Fn9
Fn10 No function is set by default.
Fn11
62
(P218)
Fn2
