Table of Contents
Advertisement
10. Using the Wi-Fi/Bluetooth function
Turning off the camera
∫
Operate the smartphone.
1 Select [
].
2 Select [
OFF].
• When [Remote Wakeup] is set to [ON], the Bluetooth function continues to operate even after
the camera is turned off, thus causing the battery to drain.
Remote shooting
Wireless connectivity required:
You can use the smartphone to record from a remote location while viewing the live view
images from the camera.
1
Connect to a smartphone.
2
Operate the smartphone.
If the camera is already connected to the smartphone via Bluetooth, select [
[Remote operation].
(iOS devices) If you need to change the connected device on the Wi-Fi setup screen, follow
the on-screen message to change the setting.
1 Select [
].
2 Record an image.
• The recorded images are saved in the camera.
• Some settings are not available.
Operation Method During Remote Recording
∫
Set either the camera or the smartphone as the priority control device to be used during
remote recording.
>
[Setup] > [Wi-Fi] > [Wi-Fi Setup] > [Priority of Remote Device]
MENU
Allows you to perform operations with both the camera and the smartphone.
• The camera's dial settings, etc. cannot be changed with the smartphone.
[Camera]
Allows you to perform operations only with the smartphone.
• The camera's dial settings, etc. can be changed with the smartphone.
• To end remote recording, press any of the buttons on the camera to turn on
[Smartphone]
the screen, and select [End].
• The setting of this function cannot be changed while the connection is active.
Wi-Fi
(P262)
267
] →
Advertisement
Table of Contents
