10. Using the Wi-Fi/Bluetooth function
Connecting via network
∫
On the camera
1
Select [Via Network].
• Follow the connection procedure described on
access point.
On your smartphone
2
Turn on the Wi-Fi function in the setup menu.
3
Connect the smartphone to the wireless access point to which the camera is
connected.
4
Start "Image App".
Connecting directly
∫
On the camera
1
Select [Direct].
• Select [WPS Connection], and follow the connection procedure described on
connect the camera to the smartphone.
On your smartphone
2
Start "Image App".
Terminating the Wi-Fi connection
1
Set the camera to Recording Mode.
• Press the shutter button halfway to return to recording mode.
2
Select the camera's menu items to terminate the
Wi-Fi connection.
>
MENU
> [Yes]
• You can also terminate the connection by pressing [Wi-Fi]
on the camera.
3
On the smartphone, close "Image App".
• When recording with [4K Pre-Burst] with the smartphone, terminate the connection only after
switching to 4K Burst recording by pressing [
[Setup] > [Wi-Fi] > [Wi-Fi Function]
P293
to connect the camera to a wireless
] on the camera.
265
P295
to