Economy] - Panasonic LUMIX DC-G95 Owner's Manual

9. Menu Guide

[Economy]

This is a function to automatically turn the camera to sleep (power save) status or turn off
the viewfinder/monitor if no operation is performed for a set time. Reduces battery
consumption.
[Sleep Mode]
[Sleep
Mode(Wi-Fi)]
[Auto LVF/
Monitor Off]
[Power Save LVF
Shooting]
• To recover from [Sleep Mode], [Sleep Mode(Wi-Fi)], or [Power Save LVF Shooting], perform
one of the following operations:
– Press the shutter button halfway.
– Set the camera on/off switch to [OFF] and then [ON] again.
• To recover from [Auto LVF/Monitor Off], press one of the buttons.
Not available in these cases:
• [Economy] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– When recording with [4K Pre-Burst]
– When recording in [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (when [Auto Shooting] is set)
– When recording with Live View Composite
– When using the HDMI output during recording
– When using the AC Adaptor (optional) and the DC Coupler (optional)
Sets the amount of time until the camera is put into sleep.
Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi.
Sets the amount of time it takes for the viewfinder/monitor to turn off.
(The camera is not turned off.)
Puts the camera into sleep when the recording screen is displayed using
automatic viewfinder/monitor switching.
• [Power Save LVF Shooting] does not operate when [Time] is set to [OFF].
[Time] Sets the amount of time until the camera is put into sleep.
Sets the screen where the camera is put to sleep.
[Only Monitor Info.]:
Puts the camera into sleep only when the on-monitor recording
[Display] information screen is displayed.
[All Live View]:
Puts the camera into sleep from any screen during recording
standby.
(P49)
231