Table of Contents
Advertisement
2. Getting Started/Basic Operations
Charge the battery using the camera
Charging time
• Using the camera body and the supplied AC adaptor. The camera is turned off.
• The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not been used
for a long time may be longer than normal.
• Use the products supplied with the camera for charging.
• The battery inserted in the Battery Grip (optional) cannot be charged.
1
Turn off the camera.
2
Insert the battery into the camera.
3
Connect the camera [USB/CHARGE] socket and the AC adaptor (supplied) with
the USB connection cable (supplied).
A Connect the USB connection cable (supplied) to the [USB/CHARGE] socket.
• Place the camera in an upright position, and find the terminal at the top.
• Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or
in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
B Charging lamp
C AC adaptor (supplied)
D USB connection cable (supplied)
4
Insert the AC adaptor (supplied) into the power outlet.
Approx. 180 min
24
Advertisement
Table of Contents
