Using A Flash - Panasonic LUMIX DC-G95 Owner's Manual

For advanced features
Hide thumbs Also See for LUMIX DC-G95:
Table of Contents

Advertisement

6. Stabilizer, Zoom and Flash

Using a Flash

Applicable modes:
Open/Close the built-in flash
A To open the flash
Slide the flash open lever.
• Be careful when opening the flash as the flash will jump
out.
B To close the flash
Press the flash until it clicks.
• Be careful not to catch your finger, etc.
• Forcibly closing the flash can damage the camera.
• Be sure to close the built-in flash when not in use.
The available flash range (approximation)
When you use certain lenses, light from the flash may be blocked or fail to cover the
lens field of view, causing dark areas to appear in the resulting pictures.
The distance at which light from the flash is blocked by lens, and the distance to which
light from the flash is delivered vary depending on the lens used. Check the distance to the
subject when taking a picture.
When the interchangeable lens (H-FS12060) is used
0.5 m (1.6 feet) to 7.3 m (24 feet)
When the interchangeable lens (H-FSA14140) is used
0.5 m (1.6 feet) to 7.3 m (24 feet)
When the interchangeable lens (H-FS1442A) is used
0.5 m (1.6 feet) to 7.3 m (24 feet)
• These ranges are obtained when the ISO sensitivity is set to [AUTO] and [ISO Auto Upper Limit
Setting] in [ISO Sensitivity (photo)] is set to [AUTO].
Wide
Wide
Wide
0.3 m (0.98 feet) to 4.5 m (15 feet)
0.5 m (1.6 feet) to 4.5 m (15 feet)
0.3 m (0.98 feet) to 4.5 m (15 feet)
159
Tele
Tele
Tele

Advertisement

Table of Contents
loading

Table of Contents