Table of Contents
Advertisement
10. Using the Wi-Fi/Bluetooth function
Playing back/saving recorded images and sending them to social media
sites
Wireless connectivity required:
1
Connect to a smartphone.
2
Operate the smartphone.
If the camera is already connected to the smartphone via Bluetooth, select [
[Remote operation].
(iOS devices)
Depending on the connection status of the smartphone, you may need to change the
connected device on the Wi-Fi setup screen. Follow the on-screen message on the
smartphone to change the setting.
1 Select [
].
• You can switch the images to be displayed by
selecting the icon (A) on the top left of the screen.
To display images stored in the camera, select
[LUMIX].
(To play back the image)
2 Touch the image to enlarge it.
• When you play a motion picture, image quality
differs from that of the actual recorded motion
picture. In addition, depending on the smartphone
or conditions of use, the image quality may
deteriorate or the sound may skip during motion
picture or picture playback.
(To save the image or upload it on a social media site
or other web service)
3 Touch and hold and then drag the image.
• An OS version of Android 7.0 or higher or iOS 10.0 or higher is required to save pictures in
RAW format.
• Depending on the smartphone or its OS version, pictures in RAW format may not be displayed
correctly.
• You cannot save the following types of images:
– Motion pictures in AVCHD and 4K formats
– 4K burst files
– Images recorded with the Post Focus function
Wi-Fi
(P262)
270
] →
Advertisement
Table of Contents
