Table of Contents
Advertisement
12. Others
Selecting battery usage priority
∫
Preparations:
• Turn the camera off, and remove the cover for the Battery Grip connector.
1 Attach the Battery Grip to the camera.
2 Turn on the camera.
3 Select the menu.
>
MENU
[BODY]:
The battery in the camera is used first.
[BG]:
The battery in the Battery Grip is used first.
• When the battery in the Battery Grip is used, [
• When the cover for the Battery Grip connector is difficult to remove, move the corner of the
camera with a groove towards the center when removing.
• Read the operating instructions of the Battery Grip for details.
Shutter Remote Control (optional)
When connected to the [REMOTE] socket on the camera, the
Shutter Remote Control (DMW-RS2: optional) can be used for the
following purposes:
– Fully pressing the shutter button without camera shake
– Securing the shutter button during bulb recording and burst
recording
– Start/end the motion picture recording
Shutter Remote Control Motion picture button
∫
You can disable the Motion picture button when not recording a motion picture to prevent
erroneous operation.
>
[Custom] >
MENU
Settings: [ON]/[OFF]
• Read the operating instructions of the Shutter Remote Control for details.
Not available in these cases:
• You cannot use the Shutter Remote Control for the following operation.
– Canceling [Sleep Mode], [Sleep Mode(Wi-Fi)] or [Power Save LVF Shooting]
[Setup] > [Battery Use Priority]
[Operation] > [Video Rec. Button (Remote)]
] is displayed on the screen.
315
Advertisement
Table of Contents
