Table of Contents
Advertisement
10. Using the Wi-Fi/Bluetooth function
Send Images Stored in the Camera
∫
Images can be selected and sent after recording.
[Single Select] setting
1
Select the picture.
2
Select [Set].
[Multi Select] setting
1
Select the picture. (repeat)
• The setting is canceled when the picture is selected
again.
2
Select [OK].
• To close the connection, select [Exit].
Not available in these cases:
• Images recorded with another device and images modified or edited on a PC may not be sent.
Image send settings
∫
Pressing [DISP.] after completing a connection allows you to change the settings for
sending such as the image size for sending.
[Size]
[File Format]
(Destination:
[Smartphone], [PC])
[Delete Location
Data]
(Destination: [Cloud Sync.
Service], [Web service])
[Cloud Limit]
(Destination: [Cloud Sync.
Service])
Resize the image to send.
[Original]/[Auto]/[Change] ([M], [S] or [VGA])
• You can set this to [Auto] if the destination is [Web service].
It changes the image size according to the status of the destination.
[JPG]/[RAWiJPG]/[RAW]
Deletes the location information from images before sending them.
[ON]/[OFF]
Sets the operation to be performed when the Cloud Folder runs out of
free space.
[ON]:
Do not send images.
[OFF]:
Delete images from the oldest ones, then send new images.
279
Advertisement
Table of Contents
