User Logout - Avaya IP Office D100 Manual

Using sip wireless terminal

Hide thumbs Also See for IP Office D100:

Table of Contents

Setup

If you do not enter a number within 30 seconds, the handset returns to the Idle state.

3. The handset then prompts you to enter the password provided by your administrator for that

extension number. Use the >> soft key to move the cursor to the right, or wait two seconds

for the cursor to progress automatically. Note that the password length is limited to seven

characters.

If you enter an invalid extension or password, the display reads Login Failed for three

seconds and then the handset returns to the logged-out state.

Once authorized, the handset returns to an Idle state, but with the user logged in. The

handset is now ready for use.

User logout

Use the following procedure to log a user out of IP Office using the D160 handset.

Before you begin

You must be logged in before you can log out. Note that you can press the On-Hook key at any

time to exit the menu and cancel the logout attempt.

Procedure

1. In the Idle state, press the Config soft key to access the configuration menu list.

2. Use the Next or Prev soft keys to scroll the menu list to Logout and select it.

The display shows a confirmation message that reads Logout?

3. Press the Back soft key to cancel the logout. Press OK to proceed.

4. If you selected OK, the handset prompts you to enter the password for that extension.

If you enter an invalid password, the display reads Logout Failed for three seconds and

then the handset returns to the logged-in, Idle state.

If you enter a valid password, logout completes and the display reads Login | Config.

Table of Contents

Ip office d160