Receiving Pairing Request From Other Devices; Turning On The Bluetooth Audio - Motorola APX Series User Manual

• If the visibility fails to turn on, the display
shows VISIBLTYFAILED.
• When the timer expires, the display shows
VISI OFF.
Receiving Pairing Request from other
Devices
Turn on your radio Bluetooth Visible mode.
Your radio automatically accept the request and pair
with any request received from other device.

Turning On the Bluetooth Audio

• Turning on the Bluetooth audio using the
preprogrammed button:
2
Releasing the preprogrammed button turns off the Visibility mode.
a. Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the radio
to the headset.
You hear a short, medium-pitched tone. The
display shows HDSET ON.
BT audio routing can be configured in CPS to route
the audio to RSM or radio's internal speaker. The
audio routes to the radio's speaker if RSM is not
connected. Check with your dealer or system
administrator for more information on the
programming of this feature.
NOTICE:
For BT PTT press, the active microphone can
be configured in CPS to transmit from either
the RSM, the radio microphone, or the BT
headset. If the configured device is not
available, audio transmission reverts to BT
headset.
English
93