Deleting A Nuisance Channel; Restoring A Nuisance Channel; Call Alert Paging - Motorola APX Series User Manual

English
press the preprogrammed Dynamic Priority
button.
The radio continues scanning the remaining
channels in the list.

Deleting a Nuisance Channel

If a channel continually generates unwanted calls or noise
(termed "nuisance" channel), you can temporarily remove
the unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
NOTICE:
Deleting a nuisance channel is only possible
through the preprogrammed Nuisance Channel
Delete button.
When the radio is locked onto the channel to be
deleted, press the preprogrammed Nuisance Delete
button.
The radio continues scanning the remaining channels in
the list.
60

Restoring a Nuisance Channel

To restore the deleted nuisance channel, perform
one of the following actions:
• Stop and restart a scan.
• Mode change to another channel and back to the
original channel.
• Turn off the radio and then turn it on again.
Nuisance mode delete can be disabled by the
system administrator.

Call Alert Paging

This feature allows your radio to work like a pager.
The radio which you missed its call can send a Call Alert
page to your radio. The sender also able to know that your
radio is active.
NOTICE:
This feature must be preprogrammed by a qualified
radio technician.