Scan; Turning Scan On Or Off; Making A Dynamic Priority Change (Conventional Scan Only) - Motorola APX Series User Manual

• A Scan icon indicates that the current channel is
in the scan list as a non-priority channel. The
LED lights up solid green.
• A Priority-One Channel Scan icon indicates that
the current channel is in the scan list as the
Priority-One channel. The LED rapidly blinks
green. You hear all traffic on the Priority-One
channel, regardless of traffic on non-priority
channels.
• A Priority-Two Channel Scan icon indicates that
the current channel is in the scan list as the
Priority-Two channel. The LED blinks green.
• No icon indicates that the current channel is
deleted from the scan list.

Scan

This feature allows you to monitor traffic on different
channels by scanning a preprogrammed list of channels.

Turning Scan On or Off

Press the preprogrammed Scan button to toggle
SCAN ON or SCAN OFF to initiate or stop scan.
If the scan is enabled, the display shows SCAN ON
and the scan status icon.
If the scan is disabled, the display shows SCAN OFF.
Making a Dynamic Priority Change
(Conventional Scan Only)
While the radio is scanning, the dynamic priority change
feature allows you to temporarily change any channel in a
scan list (except for the Priority-One channel) to the
Priority-Two channel.
This change remains in effect until scan is turned off. Scan
then reverts to the preprogrammed (original) setting.
• Making a Dynamic Priority Change using the
preprogrammed Dynamic Priority button:
a. When the radio locks onto the channel
designated as the new Priority-Two channel,
English
59