Radio Indications Of Lost Bluetooth Connection; Standard Pairing Feature; Searching And Pairing The Bluetooth Device - Motorola APX Series User Manual

Radio Indications of Lost Bluetooth
Connection
The radio shows when the device has a Bluetooth
connection. Below are the radio indications when the
connection is interrupted.
The starts blinking for up to 10 seconds. You hear a
decremental-pitched tone. The display shows <Device
Type> alternating with CON LOST.
If the Bluetooth device successfully re-connects before the
Bluetooth Drop Timer expires, the display shows
momentary <Device Type> CONNCTED, and
persistently, or if the Bluetooth device fails to re-connect
within 10 seconds, the blinking
persistent .
shows
is replaced by a

Standard Pairing Feature

NOTICE:
Bluetooth tones, Bluetooth menu, and
preprogrammed buttons must be preprogrammed
by a qualified radio technician. Check with your
dealer or system administrator for more information.
Once a COTS headset is paired to your radio, it is
always connected. Therefore the battery life of the
accessory is aligned with the Talk time power
consumption and not the Standby time
consumption.
The Bluetooth Standard Pairing feature enables your
Bluetooth enabled radio to search for other Bluetooth
enabled and discoverable devices. Once the device is
discovered, your radio automatically pairs with the device.
This feature also enables your Bluetooth enabled radio to
be visible to other Bluetooth enabled devices and receive
request to pair from other devices.
Searching and Pairing the Bluetooth
Device
Ensure the Bluetooth on your device is turned on and is set
to Discoverable in order to enable your radio to detect
your device in Bluetooth.
English
91