User Maintenance; General Maintenance Information; Responsibility Of The Manufacturer; Cleaning And Disinfecting - Daiwha Meditom DT-400S User Manual

10.1 General Maintenance Information

- This section presents information for ordinary upkeep and maintenance of DT-400S/300S. It is
recommended that periodic inspection and performance testing be performed by a qualified
biomedical technician to ensure continued safe and effective operation.
- If any problem occurs, contact the local agencies or company.

10.2 Responsibility of the manufacturer

- DAIWHA is responsible for the safety, reliability and performance of the Unit only under the
following circumstance.
* Installation and set up procedure in this manual are followed.
- Assembly operation, readjustment, modification, or repairs are carried out by persons
authorized by DAIWHA Corporation, LTD.
* The electrical installation of the relevant room complies with local codes and regulatory
requirements, such as IEC and BSI.

10.3 Cleaning and Disinfecting

- Electric shock hazard
- When cleaning with damp cloth, exert cautions to prevent moist from leaking into the product. It
may cause the product to malfunction.
- Do not clean the unit with abrasive cleaning or disinfectant compounds, solvents thinner, solvent,
benzene, ammonia or acetone or other materials that could scratch the panels or damage the unit
- Turn off the unit and unplug the power cord from the wall outlet.
- Thoroughly wipe all surfaces of the unit and the power cord witch a mild cleaning solution or
disinfectant and a damp (not dripping) cloth.
- Do not allow impurities to enter the chassis.
- Do not sterilize with autoclave or EO gas.

10.4 Periodic Inspection

(1) All parts that connect to the unit should be checked to prevent damage or malfunction of the
unit, whenever you start surgical operation.
(2) It is required to check up following items at least once a month.
- Damage to the Equipotential Grounding cable.
- Damage to the power cord.
- Damage to the volume control.
Always turn off and unplug the unit before cleaning.

10. User Maintenance

Warning
Caution
10. User Maintenance53