Symbols - Daiwha Meditom DT-400S User Manual

2.2 Symbols

Caution - dangerous high voltage. dangerous high voltage.
Hazardous electrical output. Hazardous electrical output.
Non-ionizing Radiation ionizing Radiation
Attention : See instructions for use See instructions for use
Off
(Power : Disconnection form the (Power : Disconnection form the
mains)
Single Foil - used with electrodes used with electrodes
that do not monitor contact quality. that do not monitor contact quality.
Dual Foil - used with electrodes that used with electrodes that
do monitor contact quality. do monitor contact quality.
Replace Fuse only with type and only with type and
rating as shown. rating as shown.
Pure Mode : Waveform with minimum Waveform with minimum
thermal damage and hemostasis. thermal damage and hemostasis.
Blend2 Mode : Cut waveform with Cut waveform with
heavy hemostasis. heavy hemostasis.
Forced Mode : Standard mode Standard mode
mono-polar coagulation. polar coagulation.
Spray Mode : Spray mode mono Spray mode mono-
polar coagulation. polar coagulation.
Explosion Risk if used with Explosion Risk
flammable anesthetics. flammable anesthetics.
Equipotential Grounding Equipotential Grounding
Alternative Current Alternative Current
On
(Power : Disconnection to the (Power : Disconnection to the
mains)
Monitor Alarm : Return fault Monitor Alarm :
alarm.
Mono-polar output is disabled. polar output is disabled.
Replace Fuse only with type and Replace Fuse
rating as shown. rating as shown.
Blend1 Mode : Cut waveform Blend1 Mode :
with moderate hemostasis. with moderate hemostasis.
Blend3 Mode : Cut waveform Blend3 Mode :
with maximum hemostasis. with maximum hemostasis.
Soft Mode : Mode : Soft mode mono-
polar coagulation. polar coagulation.
Bi-polar Cut Mode : polar Cut Mode : Cut mode
bi-polar cutting. polar cutting.
2. Terms and Symbols Terms and Symbols13