Effect Using The Unit; Intended Purpose; Modes For Monopolar Cutting; Modes For Monopolar Coagulation - Daiwha Meditom DT-400S User Manual

4.1 Intended Purpose

This product including its associated ACCESSORIES intended for the performance of surgical
operation, such as the CUTTING or COAGULATION of biological tissue by means of high
frequency (H.F) current.

4.2 Modes for Monopolar Cutting

1) Pure
- Waveform with minimum thermal damage and hemostasis.
- None modulated 400KHz alternating current.
- For only cutting.
2) Blend 1
- 400KHz alternating current modulated by 33KHz.
- For cutting with minimum hemostasis.
3) Blend 2
- 400KHz alternating current modulated by 33KHz.
- For cutting with more hemostasis than Blend 1.
4) Blend 3
- 400KHz alternating current modulated by 33KHz.
- For cutting with heavy hemostasis than Blend 2.

4.3 Modes for Monopolar Coagulation

1) Forced Coagulation
- 400KHz alternating current modulated by 33KHz.
- For only coagulation.(Standard coagulation)
- Use Ball type electrodes or Mono-polar Forceps.
- Use in state the electrode contacts with tissue.
2) Soft Coagulation
- 400KHz alternating current maximum modulated by 33KHz.
- For only coagulation.
- Minimize tissue adhesion by 'Time restricted output'.

4. Effect using the unit

4. Effect using the unit25