Nortel 6220 User Manual page 81

24Mbps
[802.11g]
54 Mbps
48Mbps
36 Mbps
24 Mbps
12 Mbps
[802.11b]
Transmit Rate
A lower signal will increase the noise. In essence, the poorer the signal-
to-noise ratio, the lower this rate should be set.
Note: The transmit rate affects only the transmissions made by this
station.
Note: The channel/frequency values are usually determined by network
administrators. If you set the channel and frequency ensure that there are
at least four numerical channels difference between two overlapping
cells to avoid interference. For example, channels 1, 6 and 11 don't
overlap, but channels 1 and 3 do.
In the other side, if you are intended to use 802.11a, please keep in mind
that all channels (4 channels) with 20MHz bandwidth are not permitted
to be overlapped with each channels in the frequency plan.
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005
Transmit Rate
6 Mbps
11 Mbps
5.5 Mbps
2 Mbps
1 Mbps
11 Mbps
5.5 Mbps
2 Mbps
1 Mbps
83