60
9. If you can find out the IP address of the APU on the IP address
window, move the cursor to the appropriate IP address.
Figure 4-27
IP address list box
10. Right click on the IP address, and click the Configure button below
the list box on the left side of a configurator window. The
Read/Write Password screen is displayed, as shown below.
Figure 4-28
SNMP Password (Read/Write)
Enter the password "public" for the device you have selected at both
11.
text boxes, and then click the OK button.
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005