Nortel 6220 User Manual page 39

20. Click on the advanced button to set up crucial parameters such as
Radio Frequency, Transmit Rate (Bandwidth) and Network ID.
21. The Advanced Setup screen for a Secure Data Mode is shown below.
22. Setup all radio parameters including a frequency channel and
transmit power referring to the permitted setting value specified in
the following tables per radio standard.
Figure 4-11
Advanced setup dialog box
[802.11a]
Frequency Channel
149
153
157
161
Transmit Power
Maximum
50%
25%
12.5%
Caution: Do not use any other antennas except as ET-5PR12W
exceeding the allowed Max antenna gain value (12dBi) in case you select
802.11a as operation radio standard.
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005
5745 MHz
5765 MHz
5785 MHz
5805 MHz
Antenna Gain
Max allowable antenna gain:
12 dBi
Transmit Rate
6Mbps 36Mbps
9Mbps 48Mbps
12Mbps 54Mbps
24Mbps
41