10. The SNMP Password dialog box is displayed, as shown below.
11. Press "Enter" key or enter a new password instead of the default
password "public" in the basic SNMP password box.
Figure 4-7
SNMP Read Write Password dialog box
12. The main window is redisplayed.
13. To setup the interface, Click on the Interface Setup button.
14. The Interface Setup screen is enabled and displayed, as shown in the
Figure 4-9
Figure 4-8
AP Configurator Main window
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005
39