Nortel 6220 User Manual page 59

If the Setup tab is displayed in the main window as shown below,
12.
SNMP checking is a success.
Figure 4-29
Setup Tab
Note: When you test the CSU(APU mode) with Test CSU, you don't
have to change the parameters of CSU(APU mode) with AP configurator.
After all the tests are completed, you should configure the CSU(APU
mode) according to your local network design idea.
13. Select Wireless Link Test from the Analyze Tab. The Enter IP
Address screen is displayed, as shown below.
Figure 4-30
SNMP Password (Read/Write)
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005
61