Nortel 6220 User Manual page 53

25. Select "Specify an IP address" and type a specific IP address and
gateway IP address. Click OK button.
Figure 4-23
IP setup dialog box
Note: Except for cable modem built-in APU, the CSU to operate as CSU
mode is required to set a mandatory static IP address for the unit even
though it can be set in both static IP and DHCP setup.
For your reference, APU and CSU (APU mode) have DHCP Server
feature which can assign an IP address to all networks entities like CSU
and PC in the sub-network.
Note: For DHCP client mode, select "2 IEEE 802.11" as the interface
which is used to get DHCP IP address from DHCP Server.
Figure 4-24
IP setup dialog box
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005
55