Basic Operation; Selecting A Channel; D Channel 16; D Call Channel - Icom IC-M37 Instruction Manual

■ Selecting a channel

D Regular Channel
You can select a channel by pushing [▲] or [▼].

D Channel 16

Channel 16 is the distress and safety channel. It is used to
establish the initial contact with a station, and for emergency
communications. Channel 16 is monitored during both Dualwatch
and Tri-watch. While in the standby, you must monitor Channel 16.
z Push [16/C] to select Channel 16.
L To return to the previously selected channel, push [CH/WX].

D Call channel

Each Channel Group has separate leisure-use Call channels. The
Call channel is scanned during Tri-watch. The Call channels can be
selected and used to store your most often used channels in each
Channel Group, for quick recall.
See page 13 for details on setting the Call channel.
z Hold down [16/C] for 1 second to select the Call channel.
• The Call channel number and "CALL" are displayed.
L To return to the previously selected channel, push [CH/WX].
Selecting a Channel Group
D
Channel Groups are preset into your transceiver. You can select
a Channel Group for USA, International, Canadian, and ATIS,
depending on the transceiver version.
z Hold down [U/I/C] (CH/WX) for 1 second to change the channel
group.
L The selectable channel groups may differ, depending on the
transceiver version.
Version
USA
USA

UK

EUR
FRG
HOL
AUS

EXP (Other)

NOTE: You cannot transmit on Channel 70.

BASIC OPERATION

Preset Channel Group
INT CAN
 





 
ATIS


5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
9