Set Mode; Using The Set Mode - Icom IC-M37 Instruction Manual

■ Using the Set mode

You can set seldom changed settings in the Set mode.
You can customize the transceiver settings to suit your preference and operating style.
1. While holding down [VOL/SQL], push [ ] to enter the Set mode.
• The "Beep" item is displayed.
L When the transceiver is turned OFF:
Hold down [VOL/SQL], and within 1 second, push [ ]. This will turn ON the transceiver
and enter the Set mode.
2. Push [VOL/SQL], or push [▲] or [▼] while holding down [VOL/SQL] to select an item.
3. Push [▲] or [▼] to select an option.
4. Push [16/C] to exit the Set mode.
• Beep
• Scan Timer*
2
• SQL Key Action
• Power Save
• Float'n Flash Alarm
• Sub-function Delay Timer
* For the USA, EXP, and AUS transceiver versions *
1
* The "CH Display" item is displayed for each selectable channel group.
3
• WX Alert*
1
• Auto Scan*
2
• Backlight
• CH Display*
3
• Float'n Flash Power Save
• Auto SP Line Convert

SET MODE

• Scan Type*
2
• Dual/Tri-watch*
• Contrast
• Float'n Flash
• Low Battery Alarm
Except the HOL version
2
8
1
2
3
4
5
6
7
8
9
2
10
11
12
13
14
15
16
17
18
17